Recommended Alette Care and Maintenance Products can be found here.
The single greatest cause of damage to any flooring or floor finish is abrasion from dirt and grit. Wherever possible, use walk off mats at entrances and doorways. Vacuum or sweep the floor often to remove any dirt and grit.
The key to successful maintenance of all flooring types is the removal of all dirt and soil. Mopping with a sponge or string mop alone removes very little soil, but rather it dissolves the dirt and spreads it out evenly across the floor creating a dull film.
Note: For glued down products do not begin initial maintenance for a minimum of 72 hours after installation is complete. This is to assure the adhesive has had sufficient time to dry and cure.
Remove all surface soil, dirt, sand and grit by vacuuming or dust mopping.
Dried adhesive residue may be removed using lighter fluid or naphtha and a clean white rag.
DO NOT STRIP THE FLOOR